| Re: Crossover parts..
I have never had the chance to listen to different caps in isolation, where they were the only difference in the system. But I have heard speakers I like that have (gasp) electrolytic's in them. Sooo... I don't think it is worth spending more then a couple bucks for a cap in a 300$ system. Or look at it this way: build the crossovers with inexpensive caps (but measure them to be sure they are the right value). Then break-in and listen to the speaker for a while. If at a later time you are feeling frisky, swap out the caps in the tweeter. If you like the result, swap out the caps in the mid or the smaller caps in the mid/woofer.
From your list of caps I would go with the 1% Dayton or the Solen. I would not even consider the others because they are not 6.2u!!!
|