Quote:
|
I just picked up a EP1500 and was wondering if i used a 1/4 adapter to RCA is this the way id have to wire it?
|
No, that's not how to wire it.
The EP1500 is a two channel amplifier. Each of its inputs are able to accept either balanced or unbalanced connections.
An RCA connection is considered unbalanced. If you wish to connect an unbalanced RCA cable from your processor to a channel of the EP1500, you need to use a 1/4" TS phone plug (the TS stands for tip-sleeve). You may use an
RCA Jack To 1/4" Mono Plug Adapter for this job or purchase a RCA to 1/4" TS phone cable.
You would use one of these adapters on each of the two channels (assuming the EP1500 is in two-channel mode and not in bridge or parallel mode).
burcek