| Re: Calibration Problem
Sorry for the delay, been away the last week.
Another user of the Audiophile 9624 reported this sequence worked for him, following problems getting audio output:
1. On the output device select "M-Audio Delta AP 1/2", output "Wave".
2. On the input device select "M-Audio Delta AP 1/2", input "Wave"
3. Switch on the signal generator (set frequency of sine wave gen to say 1kHz to make it easy to hear).... no audio comes out.
4. Press the "Record" button on the SPL Meter and then audio comes out. From now on everything works fine independent of the state of the Record button.
5. Make sure in the M-Audio delta mixer that input is not getting mixed back into the output mix!
If the only problem you are having is with the input level, try just using the control in the M-Audio mixer to set the level.
I would be interested to see the soundcard debug file for your card if you get a chance to post it here or email it to me, use the option in the REW Soundcard menu to generate it.
|