| Re: Working at equalizing SVS pcultra with HK.
1) not sure
2) i put in the basic house curve straight away
3) try a bit of gain at these frequencies, 5db should be ok, if the curves are still there, they probably wont go away, try moving the sub.
a)/b) it sometimes helps to turn the gain up in the amp and turn down the gain on the sub to give the bfd a higher level to work with. it wont help with the dips though.
c) correct you wont need the main voulme as high, this will also raise the volume of the sub compared to the mains, so check with an spl meter on the maps test tones, i find on these, my sub ends up between 5-10 db louder then my mains depending on how much base i fancy at the time.
d) 75 or 80, dont think it matters
e) the noises generated are generaly at the -20db point, so as such quieter than you generaly hear on soundtracks etc. i calibrate most things on my amp at the 0db point, which is ear splittingly loud on music or movies.
edd
|