Quote:
|
Measured Averaging, displays the average in the AUX channel
|
My understanding is that this isn't really the intent of the averaging panel.
The help file says: "Average Impulse Responses should only be used for averaging multiple measurements from the
same location, it is likely to produce
invalid results if used on measurements made at different locations.".
Anyway, it's really simple to accomplish what you want. Take a central position reading and enter the filters for it. Then take readings in several other positions and tweak the filters to arrive at a compromise. Whether a response is a few dB here or there is of little matter. It's those large reasonant peaks that are a problem. Try and reduce those as evenly as possible across the listening area...
brucek