 No Sound From REW
I have been trying for the past hour to get REW setup but I am getting no sound output when I try to run the "set measurment level" Here is what I have done so far.
I have a fortissmo II with the newest drivers. The pc is runing windows media center 2005 SP 2.
Sound from the pc to reciever is fine. I can hear music from the pc when using media player
.
Bass management is fine. There is clearly bass coming from the pc to the sub.
I have tried selecting my soundcard and the defualt device.
I have selected all possible outputs including leaving it set to choose and then manualy adjusting the volume level in the master volume controll.
When REW is open I can not get sound from the pc at all. Media player does not output any sound. As soon as I turn it off media player is fine. I assume this is intended due to the nature of the program.
If anyone has any other suggestions please speak up. My last option is to swap out the soundcard. This particular card does have an optical output but I am using the analog output to the reciever because there is no way to loop the optical output to the analog input in order to calibrate REW. It is possible that REW is using the optical output but I don't know how I would over ride that. The optical out is turned off in the soundcard settings.
|