Quote:
wackii wrote:
 I got it to work  Question is how come the corrected sub graph is the same as the measured sub graph? I thought C weight should be compensated? Do I need to download the C weight compensated values? Thanks.
Al, |
Not fair!
You didn't explain how you got it to work?
I realize this is an old thread, but I'm having the same problem.
Using an SB Live! I'm able to set the Measurement Level (at 75db on the meter display).
But, when I do the Set Input Volume, I get the message about volume at maximum.
I hear the pink noise. I see the SPL meter reading on REW change as the noise is played. But, then the message about max volume comes up.
Suggestions?
Thanks,
Mitch