Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - Crossover Frequency and DB level
View Single Post
Old 05-08-06, 10:49 PM   #10 (Link)
 
barun
Shackster
Alias: barun
Loc: virginia
User: #462
Since: May 2006
Posts: 7
barun is offline
Re: Crossover Frequency and DB level


Hello Wayne,

Thanks. Yes, the speakers are rather small but I do get the higher frequencies. The frequency range for the speakers are as note below:
Frequency Response: 27 Hz - 150 Hz (Subwoofer)
Frequency Response: 55 Hz - 35 kHz (Front Speakers)
Frequency Response: 65 Hz - 35 kHz (Center and Surround Speakers). I do not know how they compare overall but certainly they are no where near the best.

I do have a volume control in the subwoofer but do not have a phase control switch. When you say the subwoofer should be 10db louder than the main speaker does it mean that if the main speaker is set at 0.0 db the subwoofer should be +10db.

Earlier I had set the crossover frequency at 120 Mhz but brought it down to 100 Mhz as suggested Gsmollin. I think at 120 Mhz the bass was better. Is 120 Mhz level not good for the main speakers or the subwoofer for a louder listening?


Regards,

Arun


Forum Rules Reply With Quote