Quote:
|
How do adjuste the different levels while "Setting the Measurement Level", "Calibrating the SPL Input", "Calibrating the Soundcard" and "Set the Target Level" ?
|
Most of the levels are set either with controls within REW or your receiver volume control. REW takes control of the Windows mixer and sets it's levels.
Even though your mixer only shows three settings, you can select others to view in both the playback and recording modes.
Pull down the properties of the mixer (as shown) and it reveals all the selectable settings. You can do this for both recording and playback.
mixer.jpg properties.jpg Quote:
|
what maxi level for Measurement level when Set measurement level ?
|
Generally 75dB-80dB is recommended. You have to be careful that you don't overdrive the Radio Shack microphone, so sometimes 80dB may be too high if you have a lot of large peaks..
It's always a good idea to read the
help files
brucek