Quote:
Ilkka wrote:
 You might want to adjust the filters manually. That's is a really good looking response and with a little work it can be really flat. Could you show us the response all the way down to 10 Hz?
It is also recommended to run a measurement with your mains on. That way you can see if there are some problems in the crossover range.
BTW, do you have the correction file loaded? I see you're using the older analog version. Its response can be a bit off below 20 Hz...even with Sonnie's correction file. |
When I get home after work I'll go ahead and extend the graph down to 10Hz and re-meassure with the mains on and off.
I do have the correctiong file loaded for the older analog version. REW confirms this as I get a reminder that the correction file has been loaded each time I start the program.
Would the Behringer ECM8000 be a better choice for more accurate readings (with the appropiate correction file of course)?