[Wayne A. Pflughaupt]

Well, it certainly will allow you more headroom in the BFD, because it changes the operating level to +4dBu. Will you be able to supply a strong enough signal in this mode though?

Ouch – got that backwards, didn’t I?

I had the same problem, the meters hitting red to often so I switched to the + 4 setting, and haven’t had any problems getting good readings. If the sub level is set to 0 on a –10 to +10 scale, there shouldn’t be any problem getting the level up enough, especially if it’s too hot now with the –10 setting.

Regards,
Wayne A. Pflughaupt