Quote:
|
So I broke my “rule” number 1. I decided to start the rise below the crossover frequency. I moved the beginning of the rise down to 63 Hz and sloped up from there
|
Yeah, good subject. You have discovered (I believe), the same thing I was trying to get across in
this thread, where I found that by lowering my crossover to 60Hz from 80Hz reduced that mid bass bloated sound.
I think if you have a cross at 80Hz, that it's just too soon to begin a house curve. I solved it by moving my crossover to 60Hz, but perhaps your method is better because it allows you equalization between 60Hz and 80Hz that I may not have..
brucek