Quote:
|
Just noticed the scales are wrong in the picture, sorry but I don't think that will prevent understanding of the problem
|
I would also match up my scaling. On the DEQX they are using a vertical height of 100db, where on REW you are using about 50dB....that's a huge difference to interpret.
Also they have 50% smoothing turned on in the DEQX that you should match on the REW graph.
Don't know if the C-weight switch will help. If you used the ECM8000 file from Sonnie, then it covers from 10Hz to 46KHz, so it should over-ride the C-weight switch. If you didn't use Sonnies file, you should.....
Use auto sweep...
brucek