Couldn't answer that as I'm nowhere near qualified to answer that. I haven't kept track of every LLT design built
Plus, Its totally irrelevant to my entire post, even the section you're quoting.
Quote:
|
The problem is as I mentioned, to resolve the issue of a resurgence in port output one must use a smaller enclosure with a lower tune, and this gets away from a successful LLT design.
|
Correct, but...now where did I say this wasn't the problem? An Rl-p 12d2 LLT just would not happen for the same reasons (although not to the same degree) an LMS-5200 LLT would not work. Your observation (and pretty much common knowledge for people that can read/understand programs like Unibox or WinISD etc) regarding Low Qts/High Bl drivers and the methods of overcoming those two factors hasn't been challenged in this entire thread and SHOULD be noted. We're agreeing with each other, Gosh!
So I hope that at this point everyone understands why low Qts/high Bl aren't something to look for to use in an Xl-sized Ebs alignment...its been repeated enough times in this thread
Now, Someone build me a large and low tuned Sono for my 1030ft^3 bedroom!
