[Moez]

Thanks Brucek...I actually figured out how to do it manually and exported my measurements to RoomEQ...so far it's worked out pretty well. Still do each channel at a time which is taking some time but I do have a few of questions.
1) I have two subs stacked in a corner behind my sofa which is 4 feet from my back wall. I literally can hear them behind and to my right when a movie calls for a lot of bass. For the room I have (18'X13') I'm limited to where I can place them but shouldn't i have them placed where I can't tell where the bass is coming from?
2) I own a B&W HTM center speaker and I'd like to know if it is considered bass limited with these specs: Freq. Response 49Hz - 23kHz ± 2dB on reference axis
Freq. Range -6dB at 35Hz and 50kHz, -3dB at 42Hz and 42kHz
3) I'm using B&W 802N's for right & left speakers and believe they should be listed as full range but I'm confused at what limit to set the crossover at 40,60,80? Should I do this in my AV32r_DP or on the subs? (Velodyne HGS15,& HGS-18) I'm knew at this and find more questions than answers. Thanks.