| Re: Dipolar rear surround speaker
Did a little more work today. I got the front baffle and rear input cup cut out, and I cut the Sonic Barrier foam to shape and size for the inner walls. I screwed up once or twice on the sizing, but nothing serious, and it will all be inside anyway. Next up... driver mounting and testing I think!
Oh, we cut the front baffle on a bit of an inward angle so the screws will have a little more to grip into. I wanted it pretty tight, so i turned out I had to notch out the top and bottom to fit the speaker connection and a little square protrusion up top. But we got a good snug fit in the end. And I know, I'm going very slowly!
|