Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - DIY Speaker and Subwoofer Enclosure Tools
View Single Post
Old 01-16-07, 10:50 PM   #5 (Link)
 
FlashJim
Senior Shackster
Alias: Jim
Loc: Houston, TX
User: #425
Since: May 2006
Posts: 374
FlashJim is offline
Re: DIY Speaker and Subwoofer Enclosure Tools


Clamps, most definitely!

Bessey K-Body clamp


The K-Body by Bessey is really nice because the clamping surfaces are large, flat and are parallel. The K-Body is perfect for clamping panels at right angles.



Rockler's "Sure-foot" pipe clamp


The "Sure-foot" has features like a broader base that doubles as a hanger when storing the clamp. I also sprung for the zinc plated pipes because the black oxide used on regular Home Depot type pipes react to woods like oak, leaving a black mark. Plus, they look good. I also have the clamp pads and Rockler's brand new EZ-Clutch that aids in removing the clamps.

You don't need tricked out pipe clamps like mine to have the same results. Order up some inexpensive pipe clamps from Harbor Freight and go to Home Depot or Lowes to get your pipe. That'll serve you well.

_______________________________________________
Jim
Houston, TX


Forum Rules Reply With Quote