Quote:
tdamocles wrote:
 By the way, what sub are you using? Extension below 20hz looks nice and flat.... |
I was just wondering this, Gson76's profile says he is using the KEF 2005.2 speaker system, which uses
this sub The Fq response stated on the sub is 30Hz-140Hz.
So my question is how can you get near flat response with this sub to 15Hz without increasing distortion or pushing the sub past its limits? Either the graphs are wrong or there is a lot of distortion at those frequencies. I would caution Gson76 against pushing your sub past its capabilities or you may end up with a new doorstop.
cheers
