Quote:
brucek wrote:
 Are you using a stereo plug on the input line-in of the sound card? and if so, are you selecting the correct channel?
Do you have a calibration file for this mic or is it perfectly flat?
brucek |
Hi Brucek,
The the soundcard input wire is a mono 1/8" jack that connects to the RCA output of the mic preamp.
I tried using the left and right channel selection in the REW input and only one channel has a signal coming in which is the one I am currently using with the low level.
The Mic comes with a calibration file which I loaded into REW before I did anything else.
Thanks
Ruben