| Building Sonotube w/ RL-P D4 15inch
Hello all. I am trying to figure out the diameter and height of the Sonotube and the length of the 6 inch port but I have no speaker software. Steve modeled it for someone that had the D2. This will be for HT only and I would like it to go down as low as possible. I have no test equipment so whatever you say I need I'll go with that. Thank you.
Qts: 0.447
Qes: 0.508
Qms: 3.728
Fs: 27.487 Hz
Re: 6.1
Ls: 5.303 mH
Lp: 6.268 mH
Rp: 12.39
Dia:
(% shift) 330 m
37.5 %
Vas: 148.8 L
Mms: 231.4 g
Cms: 144.8 u
Bl: 21.90 T*m
n0: 585.0 m
SPL: 89.67 dB
Sd: 0.0806 m^2
Xmag: 27.4 mm
Xmax: 24.6 mm
|