Quote:
|
So do I understand correctly then that I should equalize the sub first and get that flat (or well suited to my house curve).
|
Equalize to the target crossover chosen in REW and the receiver (i.e. 80Hz)
Quote:
|
The only thing I'm thinking is that why not just calibrate everything together at once.
|
Because you won't know if it's the mains or the sub that are contributing to the problem. Isolate the sub, and you'll know.
Quote:
So if I am going to do a sub only calibration, what's the best way to turn the speakers off?
Obviously I could just disconnect them. However I remember reading that it is very bad for an amplifier to be sending signals out to a speaker which is not attached.
|
Disconnect them with the power off and ensure they don't touch. A solid state amplifier has no problem with it. No current, no power.... Use the receiver in stereo mode and you don't need to disconnect rear, centers, etc...
Quote:
|
The left and right output from the soundcard is supposed to carry identical signals so why can one not feed the left and right soundcard output into their respective inputs in the receiver?
|
REW outputs on one channel only...... split it, if you want both mains playing.
brucek