Quote:
JohnM wrote:
 ...The 2-RCA to 1/8 adaptors can be a little bulky to easily plug in sometimes, but have the advantage that you can then run regular RCA - RCA cables to get from your soundcard to your receiver and SPL meter. |
I was concerned that the adapter may be too bulky. So I purchased a different adapter that has a 1/8" mono pin and just one RCA on the back. My plan is to run a RCA from the sound meter to that adapter and into the sound card that way.
Will that work? Logically it seems it would. However I seem to recall reading something about needing to input this as a stereo signal even though the RCA is only plugged into one side of the adapter. And I also seem to recall needing to tell REW whether the signal is coming in from the left or right channel. Perhaps this mono plug can be used and means that the signal is coming always from say the left?
Thanks.