Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - Can REW be used to help set sub distance in receiver?
View Single Post
Old 01-28-07, 11:25 PM   #9 (Link)
 
lovingdvd
Senior Shackster
Alias: lovingdvd
User: #5942
Since: Jan 2007
Posts: 157
lovingdvd is offline
Re: Can REW be used to help set sub distance in receiver?


catnip - looks very good. So this is with a house curve of about +8dB at 20 to 0dB at 80? It would be great if you could get the 20-28 range up another couple dB. Not suggesting a gain filter (since they are talked about as being so bad, although I've used a few small ones myself for this very thing).

Thanks for the tip about the sub distance and using it to smooth things around the xo point. I hadn't tried that on purpose. Although after reading this it dawned on me that after raising my sub distance by 0.5 feet I did notice it seemed to make things even smoother.


Forum Rules Reply With Quote