Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - Setting up SVS Sub
View Single Post
Old 02-17-07, 08:14 PM   #8 (Link)
 
lienly
Shackster
Alias: louis
Loc: Taipei, Taiwan
User: #2397
Since: Sep 2006
Posts: 70
lienly is offline
Re: Setting up SVS Sub


y, it's really huge! everyone comes is shocked by its size!

I just put 12NSD2 next to piano b/c where is the only place for this monster.
http://photo.pchome.com.tw/lienly/70
http://photo.pchome.com.tw/lienly/69

then just PnP w/o too much setting as you did.
phase, don't know how to adjust?

Quote:
Redman114 wrote: View Post
Yay! Received my PB12 Plus/2 today. Massive box!
1. Put the sub in the listening position and crawl around looking for the loudest point, then put the sub there, or alternatively, put the sub in the front left or rear left corner, but about 500mm out from the corner (which according to some is just the way to do it anyway. Set and forget). Set mains to SMALL.
4. Check the phase.
Chriso


Forum Rules Reply With Quote