Quote:
|
Can I connect into either the analog "cd" or "phono" to get both mains at the same time?
|
You may be a bit confused here.
When you connect to AUX (or CD for that matter), and place your receiver in
Stereo mode (with the crossover enabled), then the
sub and mains will be on, and the center and surrounds will be off.
With this setup then, to test the sub alone, you remove the mains by shutting off the mains amp (if you have one) or by disconnecting the mains speaker wires. To add in the mains, you connect the speaker wires. Of course you do this disconnecting and connecting with the power off while ensuring the wires don't short.
brucek