[allredp]

Hey Bruce!

Much obliged on that help--I'll kick the kids off the xbox and try the +4 setting tonight. With only one sub I only need to do that for channel #1 and then gain it as much as possible without clipping as I set the input level, right?

BTW, are there problems with using the +4 setting? Since the BFD Guide is pretty pointed about using the -10 setting, I'm assuming there are some negatives...

To be painfully clear for a low-tech such as myself, I only have one sub--so am I using just one channel on the BFD, right? It doesn't matter whether I use #1 or #2, right? If this is so, then there will only be one set of LEDs jumping, right?

This is deep tech for a history professor!

Thanks for the help, Bruce.

Phil