Quote:
|
According to REW I need to cut 37.2Hz back 6.3db, and also cut 45.5 back 4.0db, but how do I know how wide to make it?
|
REW tells you what to enter into the BFD in the Filters panel. Its in the REW HELP files. Just enter the values into the BFD. Bandwidth is width.
filters panel shows what to enter into BFD.jpg
If you want more of those peaks considered in the REW filter suggestions, simply Delete the Peak Table and lower the target line manually a few dB with the target setting thumbwheel and then press the Find Peaks, Assign Filters, Optimize again and you'll see the filters are a bit more aggressive in the corrected line.
brucek