| Re: 1st attempt at roomeq for sub advice needed.
Thank you.
I will run out and buy an adaptor for my ratshack meter and try that out with the correction file. I'll also drop it to around 120hz instead of 250 to see if that helps my graphs. I'm shocked that I have nothing below 45hz at all....
One thing I can't figure out, is what to do with the midi part of the fbq. I'm guessing there is some kind of file that I can export from roomeq and then import that into the fbq and it will adjust everything for me. Just can't find even the vaguest instructions on if that is possible and if so how to do that with my unit. I so wish the store had the other 'lower end' unit in stock.....
I 'kinda' figured out how to make a change on the fbq, meaning
1. assigning a channel for parametric
2. assigning a frequency
3. bandwidth----I have ZERO idea what this part means, I know it's how 'wide' to notch, but the numbers don't equate to anything I understand.
4. gain makes sense
I'd hate to have to do this manually, but will if it's the only way. Either way I'm gonna have to figure out how to read my graph and figure out how much 'bandwidth' that comes to for each filter I apply. Hope someone can chime in on that.
|