[crg]

Well I finished the two larger traps. I did not use GOM due to expense and used burlap instead. I was largely pleased with the finished results except the edges. I may re-wrap it later after working on my technique a bit with the smaller trap.

I think my mistake was that I cut the top and bottom of the frame for exactly a 24" width & 17" sides. When I cut the 703, the front corners extend just bit past the frame. For the smaller frame I am going to make plates an inch or 2 longer to see if that will work.

Any way attached are some pics. Once in the room they really blend in nicely. I finished before the wife got home. Took her down to the room and she did not immediately detect what was different (a major plus).