[Randall R. Dibble]

I am on a fishing expedition here!

I am new to the idea of using software to do what my ears have been doing for the last 40 years. My ears are wearing out and they some help!


P.A. System setup with averaging the Room (area for the dance floor and nearby seating not the entire room) will be the first priority, the second priority is setup of the Subwoofers.

Last weekend we had a show in a club, which measure over 100’ by 150’ but commonly the show is in much smaller rooms. Subwoofer placement is many times are out our control. As bassist being forced send some my signal to the mixer and out the P.A. in order to reduce stage volume I’ve become concerned about getting the best bass sound possible as well as vocals and instrument support. I imagine that my requirements are not as meticulous as a hi-fi or HT setup. I just want to set the EQ for the room Flat (or a House Curve) so that I can EQ the Vocalist and Instruments without GOOFY response issues i.e. three note BOOMY bass which betrays my finely crafted Bass Lines.

Third priority is to help set my crossover points and attenuation for the Tri-Amp P.A. that we’ve assembled.

Thanks for the Help!
Ran