[ktaillon]

Through the past year I did a lot of painted test panels, most of them looked great - as in blemish and rollermark free. I finally painted a full size screen using the RS-MAXX mud mix. First off, the paint mix is well designed but there was two problems that I ran into. It had roller marks and the metallic flakes did not lay down uniformly. This gave the look like it had a thin gray screen over the entire screen.

This mix and others that have metallics need to be sprayed.. IMHO.

The poly/pearl falls into the same category, I feel if I do top coat I will need to use a sprayer. I would like to try to roll it but I afraid of ruining the Fashion Gray. I think if you roll just the poly topcoat you will be all right but I like it better with the pearl/poly.

I believe Mechman and Wbassett has a thread on Laminates, I wonder how they are proceeding?