Hi
I hate to bring this up again but something is still broken.
I'm not complaining because it is almost certainly something I am doing wrong.
I have just checked my soundcard calibration yet again after seeing the parallel thread.
I have been through the USB SB C Live! controls dozens of times and everything is set to default (no effects, no monitoring, no nothing)
I have tried default, wave, C-media etc. Now I'm using the default "emulated SB Live 24 bit" option. Sampling rate 48kHz.
I have tried all the input and output options without any improvement.
Here I'm using
Line in and
Front Speakers (out) sockets.
My cables are phono coax with solid RCA/jack adaptors. Only one side of the cable is being used.
The surround console is set to 2/2.1 and Line in. It looks exactly like the help files.
I cancelled the soundcard cal and meter cal files and have the following to show for it:
20 meters of cables:
I thought that awful result may have been my long test cables. So I tried a two foot long cable:
I have about 5dB of headroom during the final test sweep after manually adjusting levels to avoid earlier clipping.
Computer AMD 1600+ XPSP2 with auto updates set.
Help!
