[ht2001]

Hi,

I have managed to measure the frequency response of my PB12+/2 using REW and in my room, the response is pretty bad with a very strong bias towards the low end of the spectrum (20hz to 45hz) and I have quite a big dip at 53hz - cross-over is set at 80hz.

My rectangle-shaped room is pretty small measuring at only 1600 cu ft so placement of the sub is very limited. The dip at 53hz is there regardless of what I have the subs phase at and I was wondering if it was possible to bring everything down so that it is in-line with the dip i.e it doesn't become a dip any more.

Or would it be safe to use a 10dB boost at 53hz without any detrimental effect on the sub?

Any help would be much appreciated.

Thanks