Quote:
brucek wrote:
 Are you using a mono to stereo adapter at the line-in of the soundcard. The Galaxy is mono and the soundcard is stereo, so you need an adapter to 'break out' the left and right channel, and only use the one channel and then select that channel in REW?
Did you run the Check Levels routine?
Did you run the Calibrate SPL routine?
BTW, it looks like you have your Target level set to 0dB. Set it to 75dB or run the Set Target Level routine.
Graphs should be posted with a vertical scale from 45dB to 105dB and a horizontal scale from 15Hz to 200Hz......... 
brucek |
I'm using the stereo mini-plug to RCA adapters on the soundmeter, line-in and line-out of the sound card. Then I'm running all the RCA cables on the left (white) channel. should the mono out from the soundmeter be mixed back into stereo into the soundcard? I thought I only needed to use one channel. Interesting thing was the soundmeter was only active on the left channel.
I ran both check levels and Calibrate SPL.
I edited the graph above to change the target level.