| Re: Noobie with REW help with measurements
Why is your target at ~95dB ?
If you followed the 4 steps I outlined above for each measurement, it would be impossible to get a 95dB target. Yet I note the sunfire target is at 75dB....... If you have measured 75dB at the listening position with the SPL meter and then matched the REW SPL meter to the same 75dB and then pressed Set Target Level, how could you end up with a 95dB target?
Disregarding the target problem, I think you'll find trying to integrate two subwoofers that enjoy a different frequency response, very difficult. The most two subwoofers will give you is extra headroom, and that's only if the response matches.
What is your goal with two subs? Did you own one sub and then decide to move up to a better one and couldn't bear to part with the original, feeling it would add to the mix?
brucek
|