| Re: Do I need room EQ?
Yes, doubled checked.
I used the guide to set it all up. Only deviation I had to make was to use "what you hear" as input, otherwise no input was detected. Turns out only "wave" works and not microphone..? well I can do the SPL cal and it shows the db etc.
My soundcard is audigy 2 ZS.
Other noteworthy information:
PC to reciever is done via Minijack <--> coax (only have 1 mini jack <-> 2xRCA)
PC to SPL meter is done via minijack <--> 2 x RCA (Using left, as right make the SPL meter's clip)
/claus
Last edited by clausdk; 06-29-07 at 07:41 AM.
|