Quote:
|
My receiver is a Pioneer 1015TX in which the manual indicates output specs on the RCA connections of 335mv and 2.2 k-ohms. The input sensitivity of the PLX3602 is listed as 1.25 volts rms and 10k-ohms unbalanced and 20k-ohms balanced. Will this work?
|
Yes, it will work. I suggest that the spec from the pioneer of 335mvolts is the nominal output and indicates the standard consumer nominal level of -10dBV (which is ~316mvRMS). The normal maximum output of that interface would then likely be a standard +2dBV (which is 1.26mvRMS). That is consistent with the maximum spec you list for the PLX3602. Just make up your RCA to TRS (or XLR) connector and you'll be fine..
brucek