Yeah ya I know that was funny I figured my JBL PB12 duked it out in everything I had thrown at it before. Started watching WOTW in DTS at my reference level. About 20mins in I heard this rattle/buzzing from my sub so I turned it down and it was ok but still buzzed. Well after i finished watching WOTW I went to listen to some music and the bass was just rubbish...
Now I decided to replace it with a Definitive ProSub100tl and wasn't entirely happy the vent made alot of noise on loud pieces. So I decided to get trade it in for the SuperCube III. The SCIII was a floor model and worked..but got home pluged the thing in and nothing
Tried a new fuse still nadda. Called up the dealer said hey, if I take this back today and trade in my Studio Monitor 450's what will I owe ya for a pair of BP7006 towers, he said the difference in the tax is all. So thats that debacle...
Since then I have built a DIY Sub witha the Dayton RSS315-4 High Fidelity Driver, a 2cu^ft Dayton/PE Encolure and a 500w RMS BASH amp from PE. After a nice 1h 45min date with the tools and garage I have a new sealed sub that only burned me $550 after shipping that hits 15hz with authority and 20Hz at close to 100dB.
~Bob