| Re: When do I switch from RS SPL to calibrated mic?
Sonnie,
I am having some difficulty with the mic. (I am using the ECM8000 and UB802 as per recommendation) I can't seem to set the level high enough on the UB802 to get a measurement level in REW below the max. If I turn up the level on the 802 too high, I start to get feed back on the sub. If I set the level just below where I get feed back on the sub, when I set input volume, I get the error that it is at the max. Should I be getting this feedback? Something connected incorrectly? Any and all help is greatly appreciated.
|