Quote:
| JohnM wrote:
Calibrate as usual once your filters are in place. Whether that should be 75dB or lower or higher is a topic that tends to attract lively discussion. A good way to set the sub level is to make a full range measurement through your AV processor with both the sub and a main speaker running, see how the sub level compares with the general level of the main speaker through the 500Hz to 1.5kHz range and tweak the sub level accordingly. |
Sounds good.
One problem though i initially wanted to connect the external sound card to my receiver, and perform the test that way. However, using the method described in the online REW help files i was getting lots of feedback (i check all of the connections and cables), so much so, i had to use connection method 1 bypassing the av receiver.
With this i mind i am not sure how to perform a sweep to see how my main speakers and sub are running together