Hi gang:
First off, thanks for posting so much good info about BFD & REW. I'm familiar with the basic concepts but am new to the tools used to apply them.
After reading a number of posts, especially the one below, thought someone might have additional insight.
http://www.hometheatershack.com/foru...gh-enough.html
I also run an Onkyo 7.1 reciever with LFE line outs, and a Velodyne sub. Definintely never had issues with power - until hooking up the BFD. It seems I also cannot get the sub to respond with more than a bar or two on the level meter without cranking up volume severly north of normal.
The BFD is running in bypass mode, I just reset the box to factory settings, cleared all filters from preset 4, and the button is pressed in.
What could be some causes of a 20-30db difference in output with only the BFD added?
Thanks for the help,
Andy