[Wayne A. Pflughaupt]

Jason Schultz wrote:

Thanks brucek
A Question, should i be measureing bass frequencies in 1hz increments or is 2hz - 5hz accurate enough.

If you’re using REW, just run the sweep. If you’re measuring manually, I personally prefer frequencies at 1/6- or 1/12-octave spacing. This will make it easier to determine equalizer settings, because the width of EQ filters are set as octaves.

What you might do is, after finding a peak or depression via the manual method, go back and play individual frequencies above and below that point, to find the exact frequency where it is centered.

Regards,
Wayne