Quote:
|
guess I might be confused with all the different connections
|
Yep, no problem.
I think you only need to use channel one with a TS unbalanced 1/4" connector and cable between line-out and line-in. I assume that your equipment will be unbalanced and (of course) the meter is unbalanced, so this should work fine.
Be sure to shut down the monitor mode of channel one before attempting anything. This is a standard problem with soundcards and REW. The monitor mode allows the simultaneous monitoring of the sound while recording, and it should not be used when using REW. Be sure this is disabled before attempting the soundcard calibration.
Do you think this may be your problem in trying to create a soundcard cal file?
Does REW recognize your card and allow you to select the channel in question on the Settings page?
brucek