[Wayne A. Pflughaupt]

So to clear things up cause I'm a little confused, you say measuring mid/high frequencies is of no use?

Hmm... If that’s what you got out of my last post, I need to enroll in a “effectively getting your point across” class.

Certainly, if you are going to try to EQ your mains, or see if perhaps they could use it, or see any effects you might be getting from treatments, you need to measure the mid/hi frequencies. If you haven’t already done so, you should move up to the calibrated Behringer mic, rather than the SPL meter, which is effectively “done” at about 7000 Hz.

Regards,
Wayne A. Pflughaupt