Quote:
|
When doing the actual measuring I thought I connected "right channel out" from the soundcard to "right channel in" on the preamp since only one channel will be used for measuring. I assume this is "mono" and not a "summed" signal I am sending from the card to the preamp? IOW, I do not connect a Y-adapter to the soundcard output?
|
Some people connect a Y-adapter at their receiver "CD" or "AUX" input (I do), so that when it comes to taking a measurement with the Mains along with the subwoofer signal, they will be driving both Mains. The signal is indeed mono from the soundcard via REW, but you may want to split it at your receiver.
Normally, you take a sub only measurement, and setup your equalization. Then add the mains, and measure, so that you can assess the crossover region.
brucek