Quote:
|
I use 2 Rel Storm III subs that are directly connected to my amplifier left and right outputs via neutrik connection at the sub input. The crossover is controlled at the sub input.
|
Yep, OK. Then I take it you're not doing this frequency response measurement in anticipation of using a BFD equalizer for your subs. Perhaps, you want to find the best positioning for the subs?
Quote:
|
From what I can understand, in my setup, I would just use a single cable coming out of the card and connect that single cable to the same channel at the preamp input.
|
Mmmm, I would think you would want to use the single cable from the soundcard (which is basically the listening position response), to feed both Left and Right of the preamp. Your measurements will be a combination of your mains and both subs in concert.
brucek