Quote:
brucek wrote:
 Yep, OK. Then I take it you're not doing this frequency response measurement in anticipation of using a BFD equalizer for your subs. Perhaps, you want to find the best positioning for the subs? |
I just want to see where I am before I decide on a BFD.
Quote:
brucek wrote:
Mmmm, I would think you would want to use the single cable from the soundcard (which is basically the listening position response), to feed both Left and Right of the preamp. Your measurements will be a combination of your mains and both subs in concert.
brucek |
That's exactly what I want to do, measure the response of both main speakers & both subs outputting signal at the same time. If this is the case I would connect the left
and right outputs from the soundcard to the left and right inputs of my preamp, correct?
I thought I read in REW instructions to only connect to one channel and turn the other one off.