| Re: E-MU 1616M soundcard calibration help needed.
Ah, ok, so I misunderstood. I will just connect both outputs to both inputs on the preamp and measure the response with both mains on.
This is taken from REW instructions:
To make measurements that will show the response of main speakers as well as the subwoofer, and to view the integration between subwoofer and main speakers, connect to an AV processor input so that the effects of your AV processor's bass management can be included in the measurements. Connecting to the left or right channel of an analog input will allow the corresponding main speaker and the subwoofer responses to be measured - turn off or disconnect the relevant main speaker or the sub to exclude them from a measurement.
I guess this is what confused me.
|