[subby]

There is something I don't understand about setting the parametric filters up on the BFD. If you scroll through all the frequencies you find all kinds of frequenties in between. Not just 20Hz, 21Hz,...
You also Have 20.2Hz, 20.7Hz, 20.9Hz, 21.1Hz,...

for example: If you have a peak between 20Hz and 27Hz, do you also have to set filters for those frequenties in between or only for a few. Because there are about 4 defferent frequenties between every regular frequenties and your 20 filters per channel will be used quit quickly. I hope you understand my question because I can't explaine it very easy.

I also don't know what those 1/60 octaves on the bandwith button mean and for what you need to use them.
And is there a way to set the BFD in standby mode?
Because I allways have "run" on the display and the leds are quit bright, and for my HT room also being my bedroom it's quit irritating to have these bright leds on all night.