Quote:
| jimsfield wrote:
I am unable to complete the Soundcard calibration. After I have run Calibrate,
saved the calibration file, the file is loaded, and I go to check the calibration
by running Automatic measurement with the soundcard input connected to the output
I get a dialogue box that says: There are already measurements for this channel,
to continue the measurements must be Removed.
If you Cancel the existing measurements will be kept. |
Before checking the calibration click on the "Left" channel tab, otherwise you are just making another measurement on the soundcard channel (hence the warning you are about to overwrite the last measurement you made).
You don't need to add ".cal" on the filename, REW does it for you if you omit it.